micro-d coaxial/power - .050" contact spacing mdm c/p coaxial contacts 22 www.ittcannon.com dimensions shown in inch (mm) specifications and dimensions subject to change mdm power the same insulator that is used with coaxial contacts is available with power contacts. this offers the versatility of combining power and signal lines in the same connector. mdm coaxial/power power and coaxial contacts can be interchanged as desired. power contacts are rated at 13 amps, 24v rms, awg #16 stranded. mdm coaxial the mdm metal shell connectors have been tooled in several coaxial layouts and offer the versatility of combining coaxial and signal lines in the same connector. any modifications to these layouts or new requirements, please con- sult the factory. standard coax is rg178 white. ++ ++ ++ ++ 7c2/7p2 plug 308 (7.82) m ax 1 .185 (30.10) max. 1.435 (36.45) max. 1.215 ?.005 (30.86 ?0.13) 1.435 (36.45) max. 1.215 ?.005 (30.86 ?0.13) .351 (8.92) max. .351 (8.92) max. .091 ?.003 (2.31 ?0.08) dia. .091 ?.003 (2.31 ?0.08) dia. .091 ?.003 (2.31 ?0.08) .965 ?.005 (24.51 ?0.13) .416 (10.57) m ax. .416 (10.51) max. .186 (4.92) max. .186 (4.92) max. .100 (2.54) m ax. .100 (2.54) max. . 800 (20.32) max. 1.050 (26.67) max. .308 (7.82) max. 1.185 (30.10) max. .199 (5.05) max. .199 (5.05) max. . 429 (10.90) max. .429 (10.90) max. .100 (2.54) max. .100 (2.54) max. 1.050 (26.67) max. .800 (20.32) max. .965 ?.005 (24.51 ?0.13) .091 ?.003 (2.31 ?0.08) d ia. dia. plug receptacle receptacle 24c4/24p4 plug receptacle power contacts back potting required .350 (8.89) max. plug receptacle how to order f or mil-dtl-83513 ordering information see pages 16 and 17 s eries r ohs compliance m dm 51 p h 001 p xxx - - series c on tac t arrangements c on tac t type t ermin ation type con tac t arrangements con tac t type termin ation type termin ation code termin ation code* h ard ware m dm: (size 9-100) liquid crystal polymer (lcp) m dm: (combo layout) diallyl phthalate (dap) (h) 001 - 18",7/34 strand,#26 awg, mil-w-16878/4, type e teflon, yellow. (h) 003 - 18", 7/34 strand, #26 awg, mil-w-16878/4, type e teflon, color coded to mil-std-681 system i. m - military specification hardwa re, see page 11 for military hardwa re codes. p - jackpost k - jacksc rew-standa rd p rofile l - jacksc rew-low p rofile f - float mount b - no ha rdwa re standa rd .091 (2.31) dia. hole for sizes 9-51; .120 (3.05) dia. hole for size 100. a - .125 (3.18) dia. mounting holes for sizes 9-51; .166 (4.22) dia. hole for size 100. b 1 - .1475 (3.75) dia. hole for size 100 (per mil-dtl-83513) no number - (standard cadmium/yellow c h romate ove r nickel a174 - elect roless nickel a172 - gold over nickel a141 - irridite/alodine a30 - black anodize *see page 79 and 81 for additional termination codes. 9-15-21-25-31-37-51-100 (standa rd) 16c5, 10c10, 7c2, 24c4 (coaxial) 16p5, 10p10, 7p2, 24p4 (power) p - pin s - socket h - ha rness-insulated wi re. l - solid-uninsulated wi re. s - solder pot to accept #26 awg m ax. ha rness wi re. (not available with power contact arrangements.) or combination of coax and power s hell finish mod codes hard ware s hell finish mod codes } (l) 1 - 1/2" uninsulated solid #25 awg gold plated copper. ( l) 2 - 1" uninsulated solid #25 awg gold plated coppe r. r
|
